| Page 6 |
| Car Radiator-based PC Water Cooling System |
| Plumbing to the radiator inlet: |
 |
| Radiator outlet: |
 |
| Man, that was E-A-S-Y! |
| Now the plumbing to and from the 55 gal. barrel--has to be sealed for a closed loop: |
 |
| Into the barrel from the PCs: |
 |
| And then back out of the barrel to the pump: |
 |
| The red handled ball valve is for priming the pump: |
|
|
| I originally put the pump on top of the barrel. It worked that way, but made priming it a real PITA! So, I dropped it down to the floor. Now I use the ball valve to prime the pump, and once the siphon is created--gravity helps feed it. |
 |
| Time to finish up the main plumbing! |
| Next Page |
| Page: 1 2 3 4 5 6 7 8 |