| Page 5 |
| Car Radiator-based PC Water Cooling System |
|
Power Options! With summer
upon us, things are warming up and with a radiator this size--a little bit
of air movement will go a long way. So, in order to restrict air movement to only through the radiator--I needed to make a shroud and seal things up. Please ignore the a/c filter--I didn't end up using it: |
 |
| After all of these "projects" you can see that I still have all my toes......well, on one foot at least! |
 |
 |
| Shroud built, door and radiator sealed--Time to add some Power! |
 |
 |
|
The barrel/pump plumbing above has been
changed. On high these fans will use ~63 watts each. On medium= ~50 w, and on low= ~40w. Not bad at all for the cooling they will offer. |
 |
 |
| A little bit of foam insulation goes a long way..... |
 |
| None needed on this one though--nice tight fit: |
 |
| Next its time to finish up the plumbing and get the radiator hooked up! |
| Next Page |
| Page: 1 2 3 4 5 6 7 8 |