|
Page 2 |
|
Car Radiator-based PC Water Cooling System |
|
I decided to offer each PC its own incoming
water, so I figured that the easiest way to do that would be to create a
manifold: |
 |
|
I decided to make the manifold for 3 PCs,
but left the extra PVC space in order to add more later--if necessary.
The manifold is installed with 1" tubing
running down through the floor into a crawlspace: |
 |
|
Yes, some "wire-management" is in order....
In the crawlspace it connects back to 1"
PVC pipe: |
 |
|
I decided after-the-fact to add drains
to the system at the lowest point: |
 |
|
It then runs a few feet up and into an
Out-building: |
 |
|
I'll worry about covering things up later: |
 |
|
Once the radiator arrived, I had to check
the fit of its new home: |
 |
|
Almost Perfect: |
 |
| |
| |
|
Next Page |
| |
| |
| |
|
Page:
1
2
3
4
5
6
7
8
|